9 Home Improvement Projects That Will Pay Off the Most in 2017

January 14, 2017 by Paul Ausick

The number of opinions on the value of a particular home remodeling project is at least as large as the number of remodeling projects homeowners might want to tackle. One constant, though, is how the project enhances the value of a home and, ultimately, its resale value.

Remodeling projects can be large (for example, adding a second floor to an existing house) or small (replacing the main entry door). On average among 29 projects included in a recent survey by Remodeling magazine, the average residual value one year after the project is completed is 64.3% of the project’s cost.

As a result, all projects are not created equal. According to the “Remodeling 2017 Cost vs. Value Report,” on a national basis only one remodeling project yields an increase in value that is more than the cost of the project. The other 28 projects return anywhere from around 91% of the cost to around 54% of costs.

We looked at the projects that return the most value nationally because some of them struck us as surprising given the conventional wisdom. Note, too, that mid-range costs are based on typical quality materials and the estimates were generated from identical specifications for the work to be done. The report also included projects calling for upscale work that is more expansive and complicated and uses more expensive materials than the baseline mid-range projects.

Among the mid-range projects are two that return more than 90% on the homeowner’s investment and two that return more than 80% but less than 90%. Among upscale projects, only one returns more than 85% and four return 70% or more.

Here are the four mid-range projects that return at least 80 of their cost.

The single project that returns more value to a homeowner than its cost is adding fiberglass insulation in the home’s attic. The project calls for a pro remodeler to air-seal a 35×30 attic floor to address any air leakage from conditioned space to unconditioned space. Then the pro would add fiberglass loosefill insulation, placing it on top of existing insulation if present. Fiberglass loosefill would be applied until thickness equating with R-30 insulation value is reached. The estimated cost of this project is $1,343 and the estimated return is $1,446, or nearly 108%.

Entry door replacement (steel)
> Cost: $1,413
> Resale value: $1,287
> Return: 90.7%

Remove existing 3-0/6-8 entry door and jambs and replace with new 20-gauge steel unit, including clear dual-pane half-glass panel, jambs and aluminum threshold with composite stop. Door is factory finished with same color both sides. Exterior brick-mold and 2.5-inch interior colonial or ranch casings in poplar or equal prefinished to match door color. Replace existing lockset with new bored-lock in brass or antique-brass finish.

Manufactured stone veneer
> Cost: $7,851
> Resale value: $7,019
>Return: 89.4%

This project replaces 300 square feet of vinyl siding from the bottom third of the house’s street-facing facade with manufactured stone veneer, two separate layers of water-resistive barrier laid over bare sheathing, corrosion-resistant lath and fasteners, and a nominal 1⁄2-inch-thick mortar scratch coat and setting bed.

Minor kitchen remodel
> Cost: $20,830
> Resale value: $16,699
> Return: 80.2%

In a functional but dated 200-square-foot kitchen with 30 linear feet of cabinetry and countertops, leave cabinet boxes in place but replace fronts with new shaker-style wood panels and drawer fronts, including new hardware. Replace combination cooktop/oven range and slide in refrigerator with new energy-efficient models. Replace laminate countertops; install midpriced sink and faucet. Repaint trim, add wall covering and remove and replace resilient flooring.

Here are the five upscale projects that return at least 70% of their cost.

Garage door replacement
> Cost: $3,304
> Resale Value: $2,810
> Return: 85%

Remove and dispose of existing 16×7-foot garage door and tracks. Install new four-section garage door on new heavy-duty galvanized steel tracks; reuse existing motorized opener. New door is high tensile strength steel with two coats of factory-applied paint and foam insulated to minimum R-12, with thermal seals between pinch-resistant panels. Windows in top panel are ½-inch insulated glass. Hardware includes galvanized steel hinges and ball-bearing urethane rollers. Lifetime warranty.

Entry door replacement (fiberglass)
> Cost: $3,276
> Resale value: $2,550
> Return: 77.8%

Remove existing 3-0/6-8 entry door and jambs and replace with new fiberglass unit with simulated wood grain, stained same color both sides; dual-pane, decorative half-glass panel with zinc caming; PVC-wrapped exterior trim in color to match existing trim; 2.5-inch interior colonial or ranch casings in hardwood stained to match door. Replace existing lockset with mortise lock with lever handle and integrated deadbolt in oil-rubbed bronze or satin-nickel finish.

Window replacement (vinyl)
> Cost: $15,282
> Resale value: $11,286
> Return: 73.9%

Replace 10 existing 3×5-foot double-hung windows with insulated, low-E, simulated-divided-lite vinyl windows. Simulated wood-grain interior finish; custom-color exterior finish. Trim exterior to match existing; do not disturb existing interior trim.

Window replacement (wood)
> Cost: $18,759
> Resale value: $13,691
> Return: 73%

Replace 10 existing 3×5-foot double-hung windows with insulated, low-E, simulated-divided-lite wood windows. Interior finish of stained hardwood; exterior finish of custom-color aluminum cladding. Trim exterior to match existing; do not disturb existing interior trim.

Grand entrance (fiberglass)
> Cost: $8,358
> Resale value: $5,855
> Return: 70.1%

Remove existing 3-0/6-8 entry door and cut and reframe opening for a 12-36-12 entrance door with dual sidelights. Move double-gang electrical box with two switches. Fiberglass door blank matches upscale entry, including color, threshold, lockset and decorative half-glass; sidelights match door. PVC-wrapped exterior trim in color to match existing trim; wider interior colonial or ranch casings (3.5-inch to cover new jack studs) in hardwood stained to match door. All work to be completed in one-day.

Sponsored: Attention Savvy Investors: Speak to 3 Financial Experts – FREE

Ever wanted an extra set of eyes on an investment you’re considering? Now you can speak with up to 3 financial experts in your area for FREE. By simply
clicking here
you can begin to match with financial professionals who can help guide you through the financial decisions you’re making. And the best part? The first conversation with them is free.


Click here
to match with up to 3 financial pros who would be excited to help you make financial decisions.